ALL MOTOR PROBLEMS

solved here!

Filter-1

A 3-Phase Filter For Brushless Exciter/Rectifiers

Operation
A three-phase filter has been included in the rectifier circuits to reduce the dv/dt (rate of voltage change) which occurs during diode rectifier commutation in standard rectifier bridge circuits. The filter absorbs the higher frequency components of the switching events to reduce the dv/dt below levels which can trigger thyristors in the remainder of the rectifier circuit.

High dv/dt levels may also occur when some components have failed or have reduced capabilities making them susceptible to dv/dt switching.

Figure # 1
Filter-1 Enclosure and Label

Instructions for testing are included in the filter package.

Elastic Stop Nuts are provided with each unit and can be used for the recommended mounting, with the proper length bolts.

The actual dimensions are 3 9/16 x 1 3/16 x 2 3/8 (including terminal strip)

Weight = .469 lb

Back